Eddy Current Flaw Detector Eddycon C

Part #: NM01EDDYC

$5,689.00

SKU: NM01EDDYC Categories: , Tags: , , , ,

Description

Eddy current flaw detector Eddycon C is referred to the testing and evaluation means. It is intended for manual testing by eddy current technique for the presence of surface and subsurface defects, such as discontinuity of the material (cracks, overlaps, holes, fine cracks, etc.).

Additional information

Weight 15 lbs
Dimensions 20 × 17 × 9 in

Specifications

Frequency range kHz from 0.01 to 16000.
Gain dB 70
Probe supply voltage V 0,5, 1, 2, 4, 6
Filter  

Hz

  • Lowpass from 1 to 4000;
  • Highpass from 1 to 4000;
  • Bandpass filter;
  • Differential;
  • Averaging.
Connected ECP differential and absolute ECP
Digital zoom
  • Main: from 1/16 to 16, with a step of 6 db;
  • Horizontal:  from 1/8 to 8, with a step of 6 dB;
  • Vertical:   from 1/8 to 8, with a step of 6 dB.
Phase rotation °, degr. from 0 to 360
ECP connector 2-pin  LEMO, 4-pin LEMO
Signal trace time sec 0.1; 0.5;  1; 2; 3; 4
Display Color TFT
Screen resolution pixel 800 X 480
Screen size inch diagonal 4.3″
mm 97 ´ 58
Signal display modes Complex plane – X(y)
Time scan – X(t), Y(t)
Defect alarm (alarm) Circle, Threshold, Sector, Cut-off
Memory for setups and testing results storage Up to 32 Gb of memory
1 defectogram occupies – 6 Mb
1 setup occupies – 0.00355 Mb
Multi-frequency operation
  • 2 – frequency multiplexing
  • Independent control of both frequencies
  • Signals mix for unwanted effects rejection
Battery  Li-Ion 12V/4,5 A×h
Operation time from the battery hour at least 8 hours
Operating temperatures °C from  minus 20 to plus 45
Protection from environmental impact IP 64
Overall dimensions mm 230 X 135 X 98
Weight with battery kg no more than 0.9 kg

Designed by Minima Studio